Extend your ROV
USBL is a widely used tracking system for underwater. The system consists of a transceiver mounted on the vessel, and a transponder mounted on Boxfish ROV. Using the USBL, the position … more of the ROV is found relative to the vessel’s GPS coordinates. The USBL may also act as a wireless communications link for piloting the ROV back if the tether were ever to fail. We can add a Blueprint Subsea X150 USBL that can track the ROV up to 1,000m depth.
We offer the option of adding a number of DVL options to the ROV. DVL is an acoustic sensor that estimates velocity relative to the sea bottom. Because of the acoustic … more nature of this technology, it operates well in low visibility. The estimated velocities are converted into an XYZ coordinate system relative to the sea bottom.
Boxfish ROV has the option of integrating the range of Blueprint Subsea Oculus dual-frequency sonars and displaying them on the console’s main screen. These sonars have 512 beams and operate at various … more frequencies between 750 kHz and 2.1 MHz with 60 degree to 130 degree fields of view. Imaging sonars are great for navigation while moving and for locating stationary or moving objects. Distances to 120m and resolution down to 2.5mm are possible depending on frequency used. Learn more
Profiling sonars are for ultra-high resolution underwater 3D reconstruction and profiling for site surveying or rendering. They operate similar to a line scanner that requires slow and controllable movements to capture the … more data. The high manoeuvrability and the active stabilisation of the Boxfish ROV are necessary to get reliable and accurate 3D reconstructions with this technology.
It is often required to do simple length measurements underwater for understanding the scale of the object in view. Boxfish Research can add laser scalers to the ROV that facilitate simple length … more measurements. Photogrammetry is another application that can take advantage of laser scalers. The 3D model built by photogrammetry techniques does not have the correct scale. Having the known length of laser scalars helps to correctly scale 3D models reconstructed using photogrammetry. Boxfish offers options of two or four laser scalers as well as external modules that can be coupled with additional cameras.
Photogrammetry is the process of making a 3D model of an environment using a single camera. During the process, the structure of the scene and the position of the ROV are found … more simultaneously. Boxfish ROV provides high quality and stabilised videos with homogeneous lighting that are very suitable to be used for photogrammetry purposes. Learn more..
Adding a fluorometer to a Boxfish ROV provides a portable and efficient method to measure water quality, pollution, and the health of marine environments. We can integrate your vehicle with a Turner … more Designs C3™ Submersible Fluorometer that has sensors for a range of fluorescent materials.
Boxfish ROVs support a large payload allowing submarine volcanologists and scientists to add environmental sensors. Available sensors include coupled CTD and pCO2 sensors for measuring temperature, pH, conductivity, and partial pressure of CO2 … more in water columns.
External 20x Zoom Camera
The Boxfish external 20x zoom camera offers a distinctive solution for scientists, subsea explorers, and filmmakers. It combines exceptional 4K imaging capabilities with user-friendly controls and a highly durable design.
Field Fast Charger
Recharge the ROV in the field in as fast as 45 minutes with the Boxfish 40/60A AC Charger. This field fast charger is enclosed in a waterproof IP67 case, and allow to … more recharge the ROV if needed while you are moving between sites.
We help you figure out what you need, just drop us your message here and
we will get back to you in 24 hours!